Objective To investigate the validity of improving the femur’s mechanical characteristics by implanting calcium phosphate ceramic screws after removing dynamic hip screw (DHS). Methods The three dimensional finite element model of the femur was built based on the CT scanning of a normal male volunteer. Then the models of the femur with and without DHS were established. According to calcium phosphate ceramic screws with porosity and apparent elastic modulus, 80% and 0.1 GPa were set as group A, 50% and 1.0 GPa as group B, and 30% and 1.5 GPa as group C. Von Mises stress distribution and maximum stress were recorded when the joint was maximally loaded in a gait cycle. Results The Von Mises in normal femoral shaft was uniform; no phenomena of stress concentration was observed and the maximum stress located at the joint load-bearing site of the proximal femur. The stress concentration was observed in the femur without DHS, and the maximum stress located at the distal femur around the screw hole. By comparing several different calcium phosphate ceramic screws, the stress distribution of group B was similar to normal femur model, and the maximum stress located at the joint load-bearing site. The other screws of groups A and C showed varying degrees of stress concentration. Conclusion Implanting calcium phosphate ceramic screw can improve the mechanical characteristics of the femur after removing dynamic hip screw, and the calcium phosphate ceramic screw with 50% porosity and 1.0 GPa apparent elastic modulus is suitable for implanting.
ObjectivesTo compare the role of problem-based learning (PBL) combined with team-based learning (TBL) methods with traditional lecture-based learning in the clinical probation teaching of bone tumor and explore which teaching method is more suitable for clinical probation teaching of bone tumor.MethodsThe 60 students of the 2013 grade five-year program medical students in West China Clinical College of Sichuan University who were undergoing clinical probation teaching in the orthopedic bone tumor subspecialty of West China Hospital of Sichuan University in April 2017 were randomly divided into 2 groups. The trial group adopted PBL combined with TBL teaching method, the control group adopted traditional teaching method. The general situation of the two groups of students were compared. After the end of the probation, the two groups of students’ knowledge mastery, comprehensive ability and satisfaction were compared.ResultsThere was no significant difference in the gender composition and the assessment scores of the last semester diagnostics course of the two groups of students (P>0.05). After the probation, in terms of knowledge mastery, the trial group’s theoretical test scores (89.13±3.47 vs. 87.03±2.99; t=2.511, P=0.015), teacher evaluation (88.33±4.48 vs. 85.90±3.96; t=2.231, P=0.030) and student evaluation (89.83±2.97 vs. 87.47±2.91; t=3.117, P=0.003) were better than those of the control group. In terms of comprehensive ability, the trial group’s ability in reasoning and induction, information management, goal completion, and communication (17.90±1.09, 18.00±0.91, 18.00±1.02, 17.90±1.13) were better than those of the control group (17.20±1.13, 17.13±1.20, 17.10±1.24, 16.83±1.29), the differences were statistically significant (P<0.05). There was no statistically significant difference in satisfaction between the two groups of students (P>0.05).ConclusionsPBL combined with TBL methods can improve the effect of clinical probation of bone tumors, deepen mastery of professional knowledge, improve comprehensive ability, and improve teaching quality.
The orthopedic bone tumor section is a difficult and key point in clinical teaching. 3D disease models have become a new tool for teaching clinical difficulties due to their intuitive and visual advantages. At present, in the standardized residents training clinical teaching of bone tumors, diversified teaching modes have accumulated a lot of experience, and the combination of 3D disease models can provide new strategies for clinical teaching of bone tumors. Therefore, this article introduces the current situation of clinical teaching in orthopedics, the current situation and challenges of bone tumor teaching, and the exploration and practice of using diversified teaching modes combined with 3D disease models at West China Hospital of Sichuan University, aiming to improve the quality of standardized residents training bone tumor teaching.
ObjectiveTo review the repair and reconstruction methods for large segmental femoral proximal bone defects caused by tumors, and to explore their clinical application effects, advantages, and disadvantages, and future research directions. MethodsA comprehensive search of Chinese and foreign databases was conducted to select basic and clinical research literature related to the repair and reconstruction of femoral proximal bone defects caused by tumors. The studies were classified and analyzed based on two main strategies: hip-preserving reconstruction and non-hip-preserving reconstruction. ResultsIn hip-preserving reconstruction, traditional methods such as allograft transplantation and vascularized autograft transplantation are common but have risks of poor bone integration and bone resorption. The clinical application of inactivated tumor segment reimplantation and distraction osteogenesis techniques is limited. In recent years, three-dimensional printing technology has become increasingly mature, with personalized prostheses and precise surgeries becoming development trends. Non-hip-preserving reconstruction primarily includes allograft prosthesis composite and total femoral replacement. The former focuses on improving the survival rate and bone integration efficiency of the allograft, while the latter requires the simultaneous reconstruction of hip and knee joint stability.ConclusionSignificant progress has been made in repairing and reconstructing proximal femoral bone defects caused by tumors, but many challenges remain. The integration of three-dimensional printing technology and digital design offers potential for precise bone defect repair. Future efforts should focus on new concepts, technologies, and materials through multidisciplinary approaches to provide personalized and precise solutions, thereby improving patient quality of life.
Objective To explore the design points of a three-dimensional (3D) printed customized cementless intercalary endoprosthesis with an intra-neck curved stem and to evaluate the key points and mid-term effectiveness of its application in the reconstruction of ultrashort bone segments in the proximal femur. Methods Between October 2015 and January 2021, 17 patients underwent reconstruction with a 3D printed-customized cementless intercalary endoprosthesis with an intra-neck curved stem. There were 11 males and 6 females, the age ranged from 10 to 76 years, with an average of 30.1 years. There were 9 cases of osteosarcoma, 4 cases of Ewing sarcoma, 2 cases of chondrosarcoma, 1 case of liposarcoma, and 1 case of myofibroblastoma. The disease duration was 5-14 months, with an average of 9.5 months. Enneking staging included 16 cases of stage ⅡB and 1 case of stage ⅢB. The distances from the center of the femoral head to the body midline and the acetabular apex were measured preoperatively on X-ray images. Additionally, the distances from the tip of the intra-neck curved stem to the body midline and the acetabular apex were measured at immediate postoperatively and last follow-up. The neck-shaft angle was also measured preoperatively, at immediate postoperatively, and at last follow-up. The status of osseointegration at the bone-prosthesis interface and bone growth into the prosthesis surface were assessed by X-ray films, CT, and Tomosynthesis-Shimadzu metal artefact reduction technology (T-SMART). The survival status of the patients, presence of local recurrence or distant metastasis, and occurrence of postoperative complications were assessed. The recovery of lower limb function was evaluated pre- and post-operatively using the Musculoskeletal Tumor Society (MSTS) scoring system, and pain relief was evaluated using the visual analogue scale (VAS) scores. Results The patient’s femoral resection length was (163.1±57.5) mm, the remaining proximal femoral length was (69.6±9.3) mm, and the percentage of femoral resection length/total femoral length was 38.7%±14.6%. All 17 patients were followed up 25-86 months with an average of 58.1 months. During the follow-up, 1 patient died of lung metastasis at 46 months postoperatively, and the remaining 16 patients survived tumor-free. There was no complication such as periprosthetic infection, delayed incision healing, aseptic loosening, prosthesis fracture, or periprosthetic fracture. No evidence of micromotion or wear around the implanted stem of the prosthesis was detected in X-ray and T-SMART evaluations. There was no significant radiolucent lines, and radiographic evidence of bone ingrowth into the bone-prosthesis interface was observed in all stems. There was no significant difference in the distance from the tip of the curved stem to the body midline and the apex of the acetabulum at immediate postoperatively and last follow-up compared with the distance from the center of the femoral head to the body midline and the apex of the acetabulum before operation, respectively (P>0.05), and there was no significant difference in the above indexes between immediate postoperatively and last follow-up (P>0.05). The differences in the neck-shaft angle at various time points before and after operation were also not significant (P>0.05). At last follow-up, the MSTS score was 26.1±1.2 and the VAS score was 0.1±0.5, which were significantly improved when compared with those before operation [19.4±2.1 and 5.7±1.0, respectively] (t=14.735, P<0.001; t=21.301, P<0.001). At last follow-up, none of the patients walked with the aid of crutches or other walkers. Conclusion The 3D printed customized cementless intercalary endoprosthesis with an intra-neck curved stem is an effective method for reconstructing ultrashort bone segments in the proximal femur following malignant tumor resection. The operation is reliable, the postoperative lower limb function is satisfactory, and the incidence of complications is low.
Objective To investigate the long-term effectiveness of uncemented allograft-prosthesis composite (APC) for reconstruction of bone defects after proximal femur tumor resection. Methods Between June 2007 and March 2014, 21 patients who underwent uncemented APC reconstruction of proximal femur after tumor resection were retrospectively evaluated. There were 9 males and 12 females with an average age of 33.2 years (range, 19-54 years). There were 9 cases of giant cell tumor of bone, 5 cases of osteosarcoma, 4 cases of osteoblastic osteosarcoma, 2 cases of chondrosarcoma, and 1 case of undifferentiated pleomorphic sarcoma. Thirteen cases of benign bone tumors were all classified as stage 3 by Enneking staging; and 8 cases of malignant bone tumors were classified as grade ⅡB in 7 cases and grade ⅡA in 1 case according to the American Joint Committee on Cancer (AJCC) staging system. Among them, 7 patients underwent reoperation after recurrence, and the rest were primary operations; 8 patients presented with pathological fractures. The preoperative Harris hip score (HHS) and American Musculoskeletal Tumor Society (MSTS) score was 40 (30, 49) and 9.1±3.5, respectively. The length of osteotomy was 80-154 mm, with an average of 110 mm. At 1 year after operation and last follow-up, HHS and MSTS scores were utilized to evaluate the function of hip joint; the gluteus medius strength score was used to evaluation of the hip abduction function. Image examinations were taken at 1, 3, 6, 9, and 12 months after operation and every year thereafter to assess the union of allograft-host bone interfaces. Intra- and post-operative complications were also recorded. Results All patients were followed up 84-163 months (mean, 123.5 months). At 1 year after operation and last follow-up, the HHS and MSTS scores significantly improved when compared with the preoperative scores (P<0.05). However, there was no significant difference in the HHS score, MSTS score, and gluteus medius strength score between the two time points after operation (P>0.05). Image examination showed that all allograft-host bone interfaces achieved union after 5-10 months (mean, 7.6 months). At last follow-up, all patients had bone resorption, including 11 severe cases, 4 moderate cases, and 6 mild cases; the bone resorption sites included Gruen 1, 2, and 7 regions. Complications included 10 fractures and 1 prosthetic fracture. Local recurrence occurred in 3 patients and pulmonary metastasis in 3 patients. Conclusion Uncemented APC is a reliable method for the reconstruction of bone defects after proximal femur tumor resection. It has the good long-term effectiveness and possesses obvious advantages in the union at the bone-bone surface.